New Preventative Maintenance Program
APLI is pleased to announce our new preventative maintenance program. Under this program, APLI will send a technician to your site to service your equipment on a semiannual, annual, or combination program. The semiannual procedure is basic preventative maintenance, the annual maintenance procedure is a complete inspection, cleaning and thorough check-out of your equipment and the combination agreement combines both the semiannual and annual trips and comes with a limited warranty.
This program includes the following procedures.
Auto-Sampler
Every 6 months
Inspect, clean and replace:
- Inspect operation of the flow switch(s)
- Inspect sampler pump(s)
- Inspect O-rings and gaskets inside sample block, replace as needed
- Inspect pressure gauges
- Inspect and set regulator(s)
- Inspect operation of all solenoids
- Inspect operation of check valves
- Clean 140 micron product inlet filter(s)
- Clean computer case and electronics
- Check operation of float switch
Every 12 months
- Everything listed under the 6-month plan plus
Rebuild:
- Sample pump(s)
- 3-way solenoids if applicable
Replace::
- 140 micron product inlet filter(s)
- All check valve seats with rebuild kit
